ICOM

ICOM IC-V80

requency coverage (Differs according to version) IC-V80(U.S.A.): Tx 144–148MHz Rx 136–174MHz*1 IC-V80E(Europe): Tx 144–146MHz Rx 144–146MHz Dimensions (W×H×D; Proj. not included) 58×112×30 mm; 2.28×4.41×1.18 in Weight (approx.) 360g; 12.7oz with antenna and BP-264 Output power (typical values) 5.5W, 2.5W, 0.5W at 7.2V DC Sensitivity (at 12dB SINAD) 0.14μV typ. Audio output power (at 10% distortion) 750mW typ. (Internal SP, 16Ω load) 450mW typ. (External SP. 8Ω load) *1 Guaranteed range 144–148MHz. All stated specifications are subject to change without notice or obligation.

Price : 0 0

ICOM IC-G80

General IC-G80 Frequency range 136MHz–174MHz Number of channels 200 channels Channel spacing 12.5kHz/25kHz Type of emission F2D/F3E Current drain Tx 1.4A (5W) Rx Stand-by 60mA typ. Max. audio 300mA (Internal SP) Dimensions (W×H×D) (Projections are not included) 58×112×30 mm Weight 140g (Without battery pack) 360g (With BP-264 and antenna) Transmitter IC-G80 RF output power (at 7.2V DC) 5.0/2.5/0.5W (High/Mid/Low) Spurious emissions Less than -70dB Frequency stability ±2.5ppm Receiver IC-G80 Sensitivity (at 12dB SINAD) 0.18μV typ. Adjacent channel selectivity (W/N) 72/65dB typ. Spurious & Image rejection 80dB typ. Intermodulation rejection 72dB typ. AF output power (at 5% distortion ) Internal SP (With 16Ω load) 750mW typ. External SP (With 8Ω load) 420mW typ. Applicable U.S. Military Specifications Icom makes rugged products that have been tested to and passed the following MIL-STD requirements and strict environmental standards. Standard MIL-810 F Method, Proc. Low Pressure Storage 500.4 I Low Pressure Operation 500.4 II High Temperature Storage 501.4 I High Temperature Operation 501.4 II Low Temperature Storage 502.4 I Low Temperature Operation 502.4 II Temperature Shock 503.4 I Solar Radiation 505.4 I Rain Blowing 506.4 I Rain Drip 506.4 III Humidity Induced 507.4 Salt Fog 509.4 Dust Blowing 510.4 I Vibration 514.5 I Shock Functional 516.5 I Shock Transit Drop 516.5 IV Also meets equivalent MIL-STD-810 -C, -D and -E. Ingress Protection Standard Dust & Water IP54 (Dust-protection and water resistant) All stated specifications are subject to change without notice or obligation.

Price : 0 0
Scroll to Top